Storm 10H Heated FTIR Gas Cell (Lightpath: 100mm)

Storm- Stainless Steel Heated Gas Cell.jpg
Storm- Stainless Steel Heated Gas Cell.jpg

Storm 10H Heated FTIR Gas Cell (Lightpath: 100mm)

from $8,823.00

The Storm 10H Heated FTIR Gas Cell is Firebird Optics’ solution for the FTIR analysis of gas samples. With the ability to use the cell from ambient temperatures all the way up to 300ºC and from low vacuum (10-2 torr) to 1 Bar of pressure you’re covered in the majority of applications.

This cell can be used in high pressure and temperature applications where glass/quartz spectroscopy samples are impractical. If you are interested in Optical Glass and UV Quartz versions of this cell, check out the Type 34 from our friends at FireflySci. They rock.

This assembly can be fitted with Firebird Optics high grade optical windows and snapped into any commercial FTIR spectrophotometer.

Can either be ordered as an empty assembly or with a pair of 47x6mm undrilled optical windows.

There is currently a leadtime of 2-3 weeks.

Optical Window Material:
Quantity:
Add To Cart

Stainless Steel Gas Cell for FTIR

  • Gas cell is constructed in 316 S.S

  • Silicone O-Rings are used between the gas cell body and the window material surface exposed to the gas cell environment.

  • PTFE gasket fitted between the window material surface exposed to the external environment and seals with the end cap assembly.

  • Overall length with both window end cap screw assemblies in place and fitting of 5mm thick windows is 122mm.

  • Inner Length of cell: 100mm; 38m clear aperture.

  • Volume: 50cc

  • Low voltage (30v) heater system for operator safety.

  • Programmable controlled temperature via optional RS232, RS485 or USB connection.

  • Has optional flow mode by using 1/16” stainless steel flow tubes at the injection septum.

  • Slide mount (3” x 2”) included.

  • Window size- 47mm diameter x 6mm thick

  • Cell is rated for 300ºC (572ºF) and 14.7psi (1bar)

Chemical Compatibility